Siding is beneficial to your house in many ways. At the same time, should it need replacing, you will have to seek the services of an expert to manage this chapter or conundrum for you. Improper installation or replacement of siding can lead to a variety of problems. Some indications that you may have to replace the siding on your house include chalking, fading, and spotting. Since siding comes in different materials such as stone, cement, wood, and vinyl, the replacement technique for each of these will vary.
1.Siding Replacement Requirements
Exposure to the elements, excessive moisture, and improper installation are the primary reasons why siding develops problems that can lead to the need for replacement.
Installation, repair, and replacement of siding requires a permit in most cities. The rules and regulations about the type of siding that you can use will also vary with jurisdiction. Checking with your local building authority will help you obtain the details on this.
Exposure to the elements, excessive moisture, and improper installation are the primary reasons why siding develops problems that can lead to the need for replacement. As soon as you see the signs of damage on the siding, it is time to take remedial action. Failure to act immediately can lead to air, water, dirt, and insects transitioning deep into the inner layers of the siding and the wall itself.
2.Siding Replacement Materials and Tools
The first thing that will have to be found is the siding. If you are replacing the entire siding, then you have the option of going for something new or just replacing the siding that you had. Once you decide on this, you can attain the required siding which comes in sections or panels. Minor repairs can be done by someone with a little skill in home improvement projects and who knows how to handle themselves with tools and materials. But if the entire siding has to be replaced, it might not be easy for you to do it all on your own.
3.Professional Help with Siding Replacement
If you are hiring a professional to conquer this situation for you then you can relax because they will acquire everything that is needed and all you have to do is convey your choice of siding to them. Before installation of the new siding can occur, preparation will have to be done and the old siding removed completely which you most likely will be quite appreciated of.
4.Siding Replacement Tips and Tricks
If you are replacing only part of the siding, you can just pry out the damaged portion first. Any nails present will have to be pried out and then the siding can be removed. If there is a moisture barrier under the siding it will have to be checked for signs of damage. In case of damage, this will also have to be replaced before the new siding can be installed.
If you have vinyl siding which has been damaged, first see if it can be repaired by patching up any holes that might have formed. Applying a patch from a leftover panel of siding is enough to repair this type of damage. At times, one or more of the panels might have to be replaced especially if there are wide cracks or holes. You will have to look for panels that match exactly to the existing ones.
A somewhat similar process is followed when wood siding has to be repaired or replaced. After the old siding is removed, you can repair any minor damage to the building paper underneath by applying roofing cement. The replacement piece of wood siding that you use must be cut out precisely and can be nailed into place with galvanized finishing nails. If you do not use the proper nails or if your contractor does not, then the nails may begin to pop out in a few years like they want to be somewhere else. This will only degrade your home while undermining the integrity of it.
If your house has log siding and this has been damaged, you will have to cut away the damaged pieces with a skill saw. The ends of the replacement log siding will have to be treated with a water sealer, stain, or primer. Screws will have to be used to set the new siding in place after the holes have been drilled. Thin wood shims may be needed to ensure that the new siding is in line with the rest of it.
5.Final Siding Touches
After installation of the log finish, the seams and joints will have to be sealed with waterproof caulking. If the log siding did not have any stain finish, it can be applied after the installation and blended to match the old siding. It will not match perfectly but it is better than not staining it and soon it will blend in with the rest of the stained siding.