How It Works

Select the work to be done
Let us know what project you need help with and when you need it done - we'll match you with the right pros for the job.
Compare matched pros
Verify pro credentials, read reviews, ask questions, discuss availability, and request project estimates.
Complete your project
Hire the pro that's right for you and your budget. After the project is complete, let your community know how it went.
Powered by

The Home Depot

Range Hood Installation

Pro ReferralHome ServicesHandiwork > Range Hood Installation

Find Trusted Range Hood Installation Pros

A range hood provides important ventilation for smoke, steam, and odors in the kitchen. In addition to an electrical connection, a range hood may require ducting to vent exhaust outdoors, so the difficulty of the installation often depends on how much preparation is required.

Do I Need a Range Hood Installed?

Range hoods help remove or reduce moisture, grease, odors, and smoke that can build up in the kitchen from cooking. Range hoods or ventilation fans are required by code in some areas and may be recommended by range and cooktop manufacturers.

What Are the Benefits of a Range Hood Installation?

Even if a range hood is not required where you live or recommended for your particular cooktop, installing one can help clear the air in your kitchen and prevent greasy buildup on the walls and cabinets around your range. Hiring a pro for the installation helps ensure your hood is connected according to local codes and the manufacturer’s specifications.

What Size Range Hood Do I Need Installed?

Range hoods should be at least as wide as the cooktop they service, preferably up to 3” wider on each side. The capacity of hoods indicates how much air they can move and is measured in cubic feet per minute. For electric cooktops, a hood should handle eight to ten CFM per inch of the cooktop’s width. For gas cooking, the hood should move 100 CFM of air for every 10,000 BTUs of the cooktop’s total capacity.

What Types of Range Hoods are Available?

Common types of range hoods include under cabinet, wall-mounted, and ceiling-mounted options. Additionally, fan-only models are an option when venting outdoors is not feasible, and downdraft vents can provide ventilation in settings where running ductwork overhead is impractical.

How Long Does it Take to Install a Range Hood?

The time needed for installation generally depends on the type of hood you select and the level of preparation required. Installing a replacement hood or a new non-vented fan where the electrical supply is in place might take just an hour or so. If new wiring and duct installation are required, the job could take four hours or more, depending on the accessibility of the attic or basement.

What Materials Are Required to Install a Range Hood?

In addition to the hood and related fasteners and hardware, your project may require ventilation ducts, an exterior vent, and wiring supplies. The installation can be accomplished with standard tools, such as a drill, saw, level, pliers, and screwdriver.

Do Range Hood Installations Have Any Hidden Charges?

The installation of a range hood is usually fairly simple, but the systems behind it are a little more complex. If there is not an existing power supply or duct installed, the scope of the project will be much broader, making it more expensive. Also, if repairs to the ductwork, alterations to cabinetry, or patching of drywall are required as a result of the installation, the extra time and materials needed by the installer will add to the bottom line.

How Much Does Range Hood Installation Cost?

An uncomplicated range hood installation in a prepared site can typically be completed for $100 to $150 in labor. If extra work is needed to power, vent, or mount the fan, the job could cost between $200 and $450. Be sure to discuss the installation requirements with your installer in order to get an accurate estimate.

We'll find you a Handyman in Atlanta

Find a Pro